Print Size Calculator

Choose a print size and resolution to calculate pixel dimensions, unit conversions, and the working size including bleed.

Quick start

  1. Pick the print type or enter the finished size.
  2. Look at the suggested resolution.
  3. Check the pixel size and the size with bleed.

What pixel dimensions should I use for a print banner?

Choose a print size and resolution to calculate pixel dimensions, unit conversions, and the working size including bleed.

How to use it

  • Choose a print format or enter finished dimensions.
  • Review the suggested resolution and adjust DPI if needed.
  • Check the required pixel dimensions and the working canvas with bleed.

How many DPI do you need for a printed banner?

The basic formula is pixels = millimeters × DPI ÷ 25.4. An A4 page at 300 DPI needs about 2,480 × 3,508 pixels.

Using 300 DPI for a three-meter banner creates an unwieldy file. Large signs are viewed from farther away and often need less resolution than business cards or flyers. Choose DPI based on viewing distance and confirm it with the printer.

Changing the DPI metadata does not add pixels or improve a low-resolution image. Screen colors can also differ from printed CMYK colors.

Add bleed beyond the finished dimensions so artwork reaches the cut edge.

What this helps with

  • Working out the formula by hand → Choose a print type and see the recommended DPI and pixel dimensions.
  • Calling printers for common paper sizes → Review standard formats and typical resolutions in one place.
  • Changing numbers in an image-size dialog → Include bleed in the calculated working size.

Limitations

  • Upscaling a low-resolution image does not restore missing detail.
  • Printer requirements for bleed and file format vary; the print shop’s specifications take priority.
  • This is a size calculator and does not convert colors to CMYK.