Measure STL File Size: check and resize before printing
Do your modeling in your usual software, and make only the STL fixes you need right before printing.
Quick start
- Open an STL file and look at its size.
- Resize it as needed.
- Check the mesh and download the fixed file.
Example: before and after
An example of opening a small house-shaped STL with no unit information. All values are example settings.
Before · a mesh with no size
| Width | Depth | Height | Unit |
|---|---|---|---|
| — | — | — | No unit information |
You cannot tell whether it fits a 220×220mm build plate, or whether the file is in inches or mm.
After · mm measurements and resizing
| State | Width | Depth | Height |
|---|---|---|---|
| Scale 100% | 84.2 mm | 52.0 mm | 31.5 mm |
| Scale 150% | 126.3 mm | 78.0 mm | 47.3 mm |
| Original inch values | 3.31 in | 2.05 in | 1.24 in |
Even at 150% it fits inside a 220mm build plate. If one side is larger than the plate, cut it along a plane.
All of this is made-up example data. The table exists only on this page and is not a download.
What this tool does
It does not offer the full features of a modeling program such as Blender or of a slicer. It is a post-processing tool for when modeling is done but, before printing, you need to check the real size, rescale the whole model, or cut it to fit the build plate. Open an STL in your browser to check its real size in millimetres and adjust size, rotation and the bottom face. If needed, split the model along a plane, check the basic state of the mesh, and download it again as STL. It only covers the file checks and fixes between modeling and slicing.
How to use
- Open an STL file to see a 3D preview and its real size in mm.
- Check the width, depth and height, and resize as needed.
- Rotate the model and set its bottom face on the plate.
- If it has to fit the build plate, cut the model at the position you need.
- Check the mesh, then download the fixed STL.
What it does not do
- It does not slice or generate supports. Its scope ends at checking and fixing the file before it goes into your slicer.
- It covers basic mesh checks and simple repairs. For complex model changes or precise mesh editing, a dedicated modeling or mesh tool is a better fit.
- STL files carry no unit information. If a file was made in inches, switch the unit to see its size in mm.
Frequently asked questions
What about files made in inches?
Check the size in mm, then convert to the unit you need and resize.
Can it slice or generate supports?
No. Its scope ends at checking and fixing the file before it goes into your slicer.
Can it repair complex meshes?
It covers basic mesh checks and simple repairs. For complex model changes or precise mesh editing, a dedicated modeling or mesh tool is a better fit.
Is my file uploaded to a server?
No. The STL file is processed in the browser you are using.
Files and personal information
Files and anything you enter are not sent to a server. They are processed only in the browser you are using now, and closing the window clears what you entered.