Sticker Border & Cut Line Maker

Add a white border and cut line around your sticker artwork, then download a sticker PNG and a cut-line SVG.

Quick start

  1. Add a sticker image.
  2. Configure the outline and cutting path.
  3. Download the result files you need.

Example

A star sticker PNG given a border and cut line with the default settings (3 mm white border, 0 mm gap, 1 mm corner rounding). A white border appears around the star, and a pink cut line follows its outer edge. The checkerboard shows transparent areas.

An orange star on a transparent background
BeforeOriginal sticker: a star with no border (example)
Sticker preview of the orange star with a white border and a pink line around it
AfterWith a white border and pink cut line (default settings)

You want to add a white sticker border and a print-ready cut line around an illustration or photo.

Add a white border and cut line around your sticker artwork, then download a sticker PNG and a cut-line SVG. Your files stay in your browser and are never uploaded.

How to use it

  • Add one sticker image. PNG, WebP, and JPG files can be up to 30 MB, 4,000 px on the longest side, and 12 million pixels.
  • Set the border and cut line. Defaults are a 3 mm white border, 0 mm between the border and cut line (the cut follows the border edge), 1 mm rounded corners, a 0.3 mm cut line, and pink #e6007e. Filling holes inside the artwork is on by default. Advanced settings include mm or px units, 300 DPI, automatic background removal, and a background color tolerance of 24.
  • Select Create sticker and review the preview. The white area is the border; the colored line is the cut line. The preview updates when you change a setting. Check the downloaded SVG before sending it to a print shop.
  • Download a sticker PNG, cut-line SVG, or combined preview PNG. Print shops usually need the sticker PNG and cut-line SVG together. Both files have the same dimensions and align precisely.

Add a white sticker border and cut line in one step

A sticker needs more than artwork: a white border gives it a finished look, and a cut line shows where it should be trimmed. Tracing a complex shape by hand in an image editor can take a while.

This tool follows the outline of your artwork to add a white border and a cut line around it. The default gap is 0 mm, so the cut line follows the border edge; you can increase the gap if needed. Add an image, choose your settings, and download the files.

A cut line can be less accurate around very complex shapes. Check the preview carefully for deep notches or thin protrusions, and make sure the line does not cross into the artwork.

What this helps with

  • Trace the outline by hand in an image editor → Add a white border that follows the artwork automatically.
  • Draw the cut line by hand → Generate it around the border and download it separately as an SVG.
  • Print a sticker without a border → Add a white edge that makes the trimming area easy to see.

Limitations

  • Complex shapes can produce an inaccurate cut line. Review deep notches and thin protrusions in the preview.
  • One image at a time: up to 30 MB, 4,000 px on the longest side, and 12 million pixels. The bordered result can have up to 16 million pixels. Detached specks smaller than 20 pixels are ignored.
  • The cut line is a guide. Print shops may require a specific color, line width, or format such as AI or PDF. Confirm their requirements and inspect the downloaded SVG, not only the preview.
  • For an image with an opaque background, such as a JPG, automatic removal works only when the background is a similar color at all four corners. It cannot remove a complex photo background, and color along the artwork edge may remain. A background-removed transparent PNG gives the cleanest result.
  • The cut line is a smoothed polygon that follows pixel edges, not a perfect curve. Printing and trimming results depend on the print shop and cutting machine.